Tag Archives: Cleaning

How To Ensure Your Cleaning Services Quote Is As Accurate As Possible

One thing that you may find out about post tenancy cleaning services is that the quote that they give you may be very different than your final bill. This can be a huge problem especially if your cleaning services end up costing you much more than you had budgeted. Here are a few tips that you can use to ensure that the amount you are paying for your cleaning services are as close as possible to your post tenancy cleaning quote.

You need to remember that the majority of companies will give you a basic quote that is based on the amount of space that the cleaning services will cover. If you misquote the size of your rooms or the number of rooms that will require post tenancy cleaning your quote for cleaning services will likely be very different than what your final bill will be.

You also need to be honest with the number of rooms and the extent of the cleaning that is needed. If a cleaning services company thinks that they are there to do a light cleaning and they are actually required to do a much more in-depth post tenancy cleaning your bill will likely be much higher than you expect it to be.

If you are unsure about how much your bill will be and want to make sure that your quote for cleaning services is as accurate as possible you may want to consider having a representative from the post tenancy cleaning company come to your flat or house and see what will be involved in cleaning it. They will be able to see the size of the rooms and how dirty they are and will be able to give you an accurate assessment as to how much cleaning services will cost you.

You can find many different companies that offer post tenancy cleaning to renters. If you want to make sure that your move is as clean and comfortable as possible you may want to consider using post tenancy cleaning services at both your old residence and your new one. If you are moving into another rental property you may want to see if it is possible for you to view your new property before your move in date and see whether or not the level of cleanliness is up to your standards.

Not every landlord or rental agency requires outgoing tenants to clean their former residence and it can be distressing to find that you have moved into a new flat that is grubby or downright dirty.

By speaking to several different post tenancy cleaning companies you will be able to get a better idea of whether a quote is reasonable or whether it is out of line with what the going rate is. Just remember to ensure that each of the quotes you are getting is based on the same information otherwise it becomes difficult to compare pricing accurately.

No matter which company you go with, hiring a post tenancy cleaning company can take a lot of the stress and labour out of your next move.

If you are looking for a skilled and reliable post tenancy cleaning company, call End of Tenancy Cleaning. They have provided cleaning services to many renters and can help you leave your old flat or home clean and hygienic.

Cleaning Your Motorcycle Well

To wash your rims the first thing we need to do is fill the bucket with water and add dish soap. The reason for dish soap is that it will cut through the grease left on the rims.

Using a brush, scrub the rims until they are clean; then rinse them off with clean water. Spray a glass cleaner in an even coat on the rims and wipe it off in a circular pattern with a rag.

As you wipe make sure to keep turning the cloth over and over so the wet side is never used more than once. If you have a lot of chrome it may take once to wipe it clean and a second spray and buffing action to shine it up.

To wash the drive chain, remove the guard from your bike, if it is equipped with one. The chain guard is usually attached to the bike with two bolts near the front of the chain, and with two bolts near the back axle of the bike.

Spray your bike’s drive chain with kerosene or WD-40. Make sure to coat it fully.

Remember to cover the inside and between each link. Putting the bike on a bike rack will allow you to raise the rear tire off the ground so you can have easy access to all parts of it.

Scrub it down with a steel wire brush that you can buy at any hardware or automotive store. Scrub it as closely as possible.

The new lubricant will not stick if there are particles of dirt and grease left on the chain. Keep a bucket of clean water nearby so you can rinse the brush out when it becomes covered in debris.

Rinse it thoroughly with clean water and allow it time to dry completely. Apply a liberal coating of wax or lube to the entire chain once it’s dry.

Make sure to coat the entire chain, including between each link. You can buy lube or chain at any automotive store or motorcycle dealership.

To wash the windshield, purchase a microfiber cloth to wash and a window cleaning solution. You may want to go down to the local bike dealer and see what they recommend and sell.

If you prefer a commercial product you may want to try a product that is a protectant and a polish. It is multipurpose; you can use it on your helmet shield, goggle, and sunglasses as well.

You might also want to try it on your tail lights and headlamp. Homemade solutions are to be tried with extreme caution.

The only fairly safe homemade concoction is water and vinegar. This works well if all you want to do is wash off a light film of grime and oil.

Spray or apply degreaser liberally to the wheels, engine area and the chain. Let the degreaser soak into the grease so it’s easier to remove.

Wipe the degreaser off with a clean rag. Use the rag to wash the chain drive as well as under the suspension.

Apply more degreaser as necessary to wash these problem areas. Mix the soap and water according to package directions.

Choose a soap suitable for the finish on your motorcycle. Get a sponge wet in the soapy water.

Wash the motorcycle from top to bottom with the soapy water. Get into all the tight spots to wash them as well.

You can pour water onto the motorcycle rather than hose it down to rinse it. You may need hot water to remove the remains of the grease and the degreaser.

Let the motorcycle dry for a few minutes, then move it to a dry spot. Use a clean dry chamois to dry the entire motorcycle.

Start the engine and let it run for a few minutes to help dry the hard to reach spots. Apply any waxes you like to your motorcycle body parts.

Buff them off with a soft rag. Apply lube to the chain and put metal polish on the metal parts of the motorcycle.

Tom Selwick has worked in the auto industry for over 25 years and has written hundreds of articles about detailing cars, and he recommends Las Vegas car detailing for the best detailing in the business.

Contact Info:
Tom Selwick